Water pump with ejector, Auto DP255

The Elefant AutoDP255 water pump with Ejector is used for pumping and distributing clean water in domestic installations in continuous or intermittent mode. For the intermittent operation, it is necessary to adjust the triggering mode of the pressure switch. Usually, internal drinking water or sanitary water supply installations work under the recommended pressure of a maximum of 2-3 bars. Thus, you can adjust the pressure switch to trigger the pump at a minimum pressure and disconnect it at a maximum pressure. The advantage of this hydrophore is the presence of the ejector, which amplifies its flow rate and maximum water discharge height. An ordinary hydrophore will be able to shoot from a maximum of 8-9 m. The Auto-DP255 Aquatic Elefant Auto-DP255 hydrophore model has an absorption potential of 25 m thanks to the ejector. The role of the ejector is to increase the pumping capacity without using a more powerful motor. The system includes a pump with a 750W motor, which requires preliminary priming before starting, and a 24 L tank with an included membrane. In addition, the smaller components are mounted: the pressure switch, the pressure gauge, the hose with a diameter of 27 mm that connects the pump to the pool and the ejector with the check valve with strainer. Other uses of Hydrofor with Ejector Aquatic Elefant Auto-DP255 are increasing the pressure in the water network, low-level irrigation, emptying tanks or pools with clean water.